Williams Products Inc.  For all your Seal and Gasket needs.
Home Products Concrete Masonry Thermal and Water Protection Custom Designs Tech Data Sealants

Everlastic® FAB-PADS FP-300

Click Here for Tech Data Sheet

Description

Bearing pads constructed of multiple layers of High Quality, cotton polyester duck fabric saturated with Nitrile.  Outstanding compression strength with superior resistance to oil, ozone, sunlight, heat, water, steam and fungus.

fabpad.GIF (3103 bytes)

 

Uses

Bearing pads under extreme loads to reduce shock and vibration and to disperse the load.

 

Typical Physical Properties

 

Property Typical Values Test Method
Density 67 lbs./cu.ft. minimum  
Hardness 90 +/- 5 Shore A  
Plies per inch 64  
Typical Load Deflection 1/2" Thick(32 Ply) 0.005 50 psi
0.008 100 psi
0.013 200 psi
0.017 300 psi
0.020 400 psi
0.023 500 psi
0.026 600 psi
0.029 700 psi
0.032 800 psi
0.034 900 psi
0.037 1000 psi
0.042 1200 psi
0.047 1400 psi
0.052 1600 psi
0.057 1800 psi
0.062 2000 psi
Typical Permanent Set

(Permanent Set% @ Compressive Stress)

0.85% 500
1.6% 1000
3.5% 3000
5.1% 5000
8.9% 10000
 
Please contact us by;  
Phone:  Toll Free 800-521-9594    or      248-643-6400
Fax: 248-643-7117
Email: Wilpro@williamsproducts.net
Rubber, Neoprene, Foam, Gasket, Seal, Construction. To the best of our knowledge this published information is accurate, however, to determine suitability of material/product for a specific application is the user's responsibility.  Williams Products, Inc. shall not be liable for any loss or damage resulting from inappropriate usage.
Everlastic® is a registered trademark of Williams Products. All other products mentioned are registered trademarks or trademarks of their respective companies.
Contact Williams Products: Phone: 800-521-9594 or 248-643-6400 or Email: Wilpro@williamsproducts.net  Contact Information