Williams Products Inc.  For all your Seal and Gasket needs.
Home Products Concrete Masonry Thermal and Water Protection Custom Designs Tech Data Sealants

Bearing Pads

Bear Pad 200
Cross Laminated with oriented fibers

Fab-Pad 300
Laminated, rubber and ductile fabric
1200 Series
Commercial Grade Dense Neoprene
AASHTO Grade Neoprene
Conforms to AASHTO requirements 2500 psi Tensile Strength  

EVERLASTIC® BEAR PAD BP-200
DESCRIPTION
:
Durable rubber compound integrated with high strength synthetic fibers, resulting in an integral bearing pad with excellent physical properties and weather resistance.

SIZES
:
Thickness from 1/4" to 1"
Widths up to 48"
Lengths up to 48"
Available in cut parts and profiles

FEATURES
:
Durable dense rubber with excellent compressive strength, hardness, tear resistance and cold weather flexibility. "Green Product" molded from masticated rubber using discarded tires.

APPLICATIONS
:
Bearing pads, shims, bumpers, vibration isolation, etc.

INSTALLATION
:
Dependent on application. Please contact Williams Products for further information.


EVERLASTIC®FAB PAD FP-300 SERIES
DESCRIPTION:
Bearing pads constructed of multiple layers of cotton duck fabric saturated with Neoprene.

FEATURES:
Outstanding compression strength. Superior resistance to oil, ozone, sunlight, heat, water, steam and fungus.

APPLICATIONS:
Bearing pads under extreme loads to reduce shock and vibration and to disperse the load.

SPECIFICATIONS:
AASHTO 18.10.2
MIL-C-882-E
 

DENSE RUBBER - NEOPRENE 
60 Durometer Commercial Grade Neoprene 1200 Series
AVAILABLE AS:
Sheets, Strips, Pads and Die Cut Parts

RECOMMENDED APPLICATION:
Vibration damping mounts, pads and linings; setting pads - steel, concrete, precast; door seals; gasketing seals; rub strips; many other construction applications
 

WILLIAMS AASHTO GRADE NEOPRENE BEARING PADS SPECIFICATION M251-90
DESCRIPTION:
Neoprene Bearing Pads are molded or cut from a molded sheet of high-grade, new neoprene synthetic rubber compound.

USE:
As economical efficient bearing plates for pre-cast, pre-stressed concrete or steel beams in bridges and buildings. Neoprene Pads permit a smooth and uniform transfer of load from the beam to the substructure, allow beam rotation at the bearing due to deflection of the beam under load. They further allow lateral and longitudinal movement of the beam caused by thermal forces. Neoprene Pads have no movable parts and thermal expansion and contraction are absorbed by the pad?s ability to give and take in shear. There is no sliding between pad and beam or between pad and abutment.

 
Please contact us by;  
Phone:  Toll Free 800-521-9594    or      248-643-6400
Fax: 248-643-7117
Email: Wilpro@williamsproducts.net
Rubber, Neoprene, Foam, Gasket, Seal, Construction. To the best of our knowledge this published information is accurate, however, to determine suitability of material/product for a specific application is the user's responsibility.  Williams Products, Inc. shall not be liable for any loss or damage resulting from inappropriate usage.
Everlastic® is a registered trademark of Williams Products. All other products mentioned are registered trademarks or trademarks of their respective companies.
Contact Williams Products: Phone: 800-521-9594 or 248-643-6400 or Email: Wilpro@williamsproducts.net  Contact Information